CMM Technician will be responsible for properly loading parts on CMM for inspection. Load and execute proper inspection program. Complete inspection documentation and maintaining records as required. Sorting and reworking components as required.Duties/Responsibilities: Perform accurate mechanical, physical and visual inspection of components using various inspection measuring equipment and gages Ensure all parts and components have been tested and measured within specifications/tolerances; initiate Non-Conformance reports as required. Communicate with supervisors and other staff to resolve inspection questions. Programming and operation of CMM equipment with minimal supervision  Accurately document the results of the inspections and testing on the computer in various programs Read and interpret specifications and blue prints Report any product defects immediately to the supervisor Maintain calibration, first article, internal auditing and training programs Support production and engineering departments Comply with all company procedures and policies. Support daily production with measurements and CMM run needs  Development of new CMM programs and optimization of existing programs Development and Execution of Measurement and Testing Routines Ballooning of prints and drawings Collection, Interpretation, and Reporting of Data Related to Dimensional Layouts, Gage R&R Studies, and Capability Studies Direct Communication with internal Customers Regarding Measurement Results Direct Communication with Vendors Regarding Equipment Calibration and Repair Assist in Troubleshooting Production Issues and Disposition of ProductRequirements: (Work Experience, Education, Certifications, Licenses) High School Diploma or GED from an accredited institution is required Experience operating a CMM (Coordinate Measurement Machine) would be a plus Minimum three years Quality Control experience is preferred Basic understanding of GD&T and blue print reading Basic understanding of machining,

CMM Technician will be responsible for properly loading parts on CMM for inspection. Load and execute proper inspection program. Complete inspection documentation and maintaining records as required. Sorting and reworking components as required.Duties/Responsibilities: Perform accurate mechanical, physical and visual inspection of components using various inspection measuring equipment and gages Ensure all parts and components have been tested and measured within specifications/tolerances; initiate Non-Conformance reports as required. Communicate with supervisors and other staff to resolve inspection questions. Programming and operation of CMM equipment with minimal supervision  Accurately document the results of the inspections and testing on the computer in various programs Read and interpret specifications and blue prints Report any product defects immediately to the supervisor Maintain calibration, first article, internal auditing and training programs Support production and engineering departments Comply with all company procedures and policies. Support daily production with measurements and CMM run needs  Development of new CMM programs and optimization of existing programs Development and Execution of Measurement and Testing Routines Ballooning of prints and drawings Collection, Interpretation, and Reporting of Data Related to Dimensional Layouts, Gage R&R Studies, and Capability Studies Direct Communication with internal Customers Regarding Measurement Results Direct Communication with Vendors Regarding Equipment Calibration and Repair Assist in Troubleshooting Production Issues and Disposition of ProductRequirements: (Work Experience, Education, Certifications, Licenses) High School Diploma or GED from an accredited institution is required Experience operating a CMM (Coordinate Measurement Machine) would be a plus Minimum three years Quality Control experience is preferred Basic understanding of GD&T and blue print reading Basic understanding of machining,

The Director of Engineering will oversee Product, Process and Applications Engineering. The ideal candidate will run all of the engineering activities and projects within the organization and make sure these are aligned with the established policies and objectives of the organizations.Supervisory Responsibilities: Plans and coordinates the work of engineering staff. Develop the team to optimize performance and skills necessary to complete work assignments. This includes continuous review of talent, hiring, onboarding and development. Oversees engineering staff and ensures that they meet goals and objectives. Conducts performance evaluations that are timely and constructive. Provides training and mentoring as needed.Duties/Responsibilities: Works with General Manager and Director of Global Operations to create long-range operating and manufacturing goals specific to the needs of the organization. New product development. Collaborates with marketing department to determine market potential for new products. Oversees progress and timeliness of projects. Reviews project reports to ensure projects are on schedule and within budget. Ability to travel domestic and international may be required. The position will be a critical liaison between customers and operations. Performs other related duties as required.Required Skills/Abilities: Excellent written and verbal communication skills. Excellent managerial and supervisory skills. Excellent analytical and problem-solving skills. Extensive technical knowledge of engineering and product development. Excellent financial skills and ability to analyze financial data. Proficient in Microsoft Office Suite or similar software.Education and Experience: Bachelors’ degree in Engineering required; Masters’ degree in Engineering or Business Administration preferred. 10+ years of experience in engineering field in a product development role. 5+ years of supervisory experience Knowledge of PCB and Assembly manufacturing requir

SECOND SHIFTThis position is responsible for maintaining the production flow through the processes in the Image Department.Duties/Responsibilities: Follow all short sheets, standard operating procedures and Amphenol’s company safety regulations. Perform/document weekly process audits and preventive maintenance. Monitor/audit records, logbook entries and documentation to ensure thorough and accurate completion using Excel. Coordinate activities of multiple tasks to ensure timely and efficient product movement. Responsible for reviewing process change documents, training and certifying new operators including maintaining dept. training matrix. Work with process engineering group to assist in the identification of new or current processes, working to improve efficiencies and/or cost down opportunities. Take a lead role in identifying any quality issues with resolution to work towards ensuring that activities are driven to address these non-conformances and proper notification is made to management as required. Responsible for machine maintenance: Ensure Preventative Maintenance is performed regularly, contact the appropriate personnel when equipment is down. Notify management of any deficiencies in product workflow, with communication for priorities between departments and group leaders. Assists in planning overtime staffing of the department to support output requirements. Attends department meetings, tie-offs, ensuring smooth transition from one shift to the next. Assist in managing department goals for safety, training, productivity and growth of employee’s. Drive improvement work as needed using improvement tools i.e. Lean Six Sigma, TQM, etc. Perform and/or learn all the operations associated with the Image dept., including: Expose, LDI Expose, Chem Clean, Coat, Develop, Manual Clean, Artwork Inspection and Catching. May be required to cross train in other departments. This position may require overtime for coverage on alternate shifts and weekends.

SECOND SHIFTThis position is responsible for maintaining the production flow through the processes in the Image Department.Duties/Responsibilities: Follow all short sheets, standard operating procedures and Amphenol’s company safety regulations. Perform/document weekly process audits and preventive maintenance. Monitor/audit records, logbook entries and documentation to ensure thorough and accurate completion using Excel. Coordinate activities of multiple tasks to ensure timely and efficient product movement. Responsible for reviewing process change documents, training and certifying new operators including maintaining dept. training matrix. Work with process engineering group to assist in the identification of new or current processes, working to improve efficiencies and/or cost down opportunities. Take a lead role in identifying any quality issues with resolution to work towards ensuring that activities are driven to address these non-conformances and proper notification is made to management as required. Responsible for machine maintenance: Ensure Preventative Maintenance is performed regularly, contact the appropriate personnel when equipment is down. Notify management of any deficiencies in product workflow, with communication for priorities between departments and group leaders. Assists in planning overtime staffing of the department to support output requirements. Attends department meetings, tie-offs, ensuring smooth transition from one shift to the next. Assist in managing department goals for safety, training, productivity and growth of employee’s. Drive improvement work as needed using improvement tools i.e. Lean Six Sigma, TQM, etc. Perform and/or learn all the operations associated with the Image dept., including: Expose, LDI Expose, Chem Clean, Coat, Develop, Manual Clean, Artwork Inspection and Catching. May be required to cross train in other departments. This position may require overtime for coverage on alternate shifts and weekends.

This position is responsible for overseeing and maintaining the operation of the chemical laboratory.Duties/Responsibilities: Follow all short sheets, standard operating procedures and Amphenol’s company safety regulations. Drive continuous improvement in the department to meet department as well as business goals. Inventory Control. Maintain current records and archive. Ensure analytical schedule is complete; Update analytical schedule when needed. Perform all aid and development of analytical procedures. Maintain lab equipment and calibration. Train Lab Techs. Maintain and update preventative maintenance packages. Update process controls in True Chem database. Troubleshoot problematic analytical issues. This position may require overtime for coverage on alternate shifts and weekends. May be required to cross train in other departments. Will be required to perform other duties as requested, directed or assigned.Requirements: (Work Experience, Education, Certifications, Licenses)To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill, and/or ability required. Associate's degree or equivalent from two-year College or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. Ability to read and follow all short sheets/customer documents. Proven leadership abilities, prior group leader or coordinator experience. Must have excellent interpersonal, communication, team building and organization skills. Ability to work in a fast-paced environment. Ability to maintain/develop reports and analyze data– Basic computer skills with Microsoft Office-Outlook/Word/Excel. Ability to work standing for extended periods of time and able to lift up to 35 lbs. safely.2+ years of PCB experience in Wet lab preferred.Amphenol offers a competitive salary and benefits. The candi

This position is responsible to lead and supervise the Production Control Group, including running MRP daily; prioritization of shop-floor work-orders; expediting, communicating and resolving obstacles to work order execution. Your team will be working in the office and on the manufacturing floor. You will work cross-functionally, interfacing with engineering, planning, and production to meet production goals.Duties/Responsibilities: Maintain a strong, motivated production control team capable of consistently managing MRP runs and work order integrity. Ensure efficient, timely work order scheduling and prioritization to ensure production teams can meet production targets. Empower the production control team to collaborate with production teams and other stakeholders to improve processes to ensure efficient WIP movement. Ensure adherence to all production control processes and make sure that all team members are trained and cross-trained. Report generation and status updates to internal customers. Actively participate in process improvement initiatives to ensure best practices across production control. Will be required to perform other duties as requested, directed or assigned.Requirements: Bachelor’s Degree or a combination of work experience and education preferred. Three to five years related experience in supply chain/production planning in a manufacturing environment. Three to five years of supervisory experience Ability to read, write and communicate to the degree necessary to perform the job. Able to handle situations involving sensitive issues with professionalism. Strong computer skills to include Outlook, Excel and Word. Ability to work cross functionally with many levels of an organization. Must be able to work independently, as well as under direction, must be highly energized, motivated and well organized. Prior experience with an MRP/ERP system preferred. Excellent interpersonal skills and the ability to influence others in a fast-paced work env

This position is responsible to lead and supervise the Production Control Group, including running MRP daily; prioritization of shop-floor work-orders; expediting, communicating and resolving obstacles to work order execution. Your team will be working in the office and on the manufacturing floor. You will work cross-functionally, interfacing with engineering, planning, and production to meet production goals.Duties/Responsibilities: Maintain a strong, motivated production control team capable of consistently managing MRP runs and work order integrity. Ensure efficient, timely work order scheduling and prioritization to ensure production teams can meet production targets. Empower the production control team to collaborate with production teams and other stakeholders to improve processes to ensure efficient WIP movement. Ensure adherence to all production control processes and make sure that all team members are trained and cross-trained. Report generation and status updates to internal customers. Actively participate in process improvement initiatives to ensure best practices across production control. Will be required to perform other duties as requested, directed or assigned.Requirements: Bachelor’s Degree or a combination of work experience and education preferred. Three to five years related experience in supply chain/production planning in a manufacturing environment. Three to five years of supervisory experience Ability to read, write and communicate to the degree necessary to perform the job. Able to handle situations involving sensitive issues with professionalism. Strong computer skills to include Outlook, Excel and Word. Ability to work cross functionally with many levels of an organization. Must be able to work independently, as well as under direction, must be highly energized, motivated and well organized. Prior experience with an MRP/ERP system preferred. Excellent interpersonal skills and the ability to influence others in a fast-paced work env

This position is responsible to lead and supervise the Production Control Group, including running MRP daily; prioritization of shop-floor work-orders; expediting, communicating and resolving obstacles to work order execution. Your team will be working in the office and on the manufacturing floor. You will work cross-functionally, interfacing with engineering, planning, and production to meet production goals.Duties/Responsibilities: Maintain a strong, motivated production control team capable of consistently managing MRP runs and work order integrity. Ensure efficient, timely work order scheduling and prioritization to ensure production teams can meet production targets. Empower the production control team to collaborate with production teams and other stakeholders to improve processes to ensure efficient WIP movement. Ensure adherence to all production control processes and make sure that all team members are trained and cross-trained. Report generation and status updates to internal customers. Actively participate in process improvement initiatives to ensure best practices across production control. Will be required to perform other duties as requested, directed or assigned.Requirements: Bachelor’s Degree or a combination of work experience and education preferred. Three to five years related experience in supply chain/production planning in a manufacturing environment. Three to five years of supervisory experience Ability to read, write and communicate to the degree necessary to perform the job. Able to handle situations involving sensitive issues with professionalism. Strong computer skills to include Outlook, Excel and Word. Ability to work cross functionally with many levels of an organization. Must be able to work independently, as well as under direction, must be highly energized, motivated and well organized. Prior experience with an MRP/ERP system preferred. Excellent interpersonal skills and the ability to influence others in a fast-paced work env

This position is responsible to lead and supervise the Production Control Group, including running MRP daily; prioritization of shop-floor work-orders; expediting, communicating and resolving obstacles to work order execution. Your team will be working in the office and on the manufacturing floor. You will work cross-functionally, interfacing with engineering, planning, and production to meet production goals.Duties/Responsibilities: Maintain a strong, motivated production control team capable of consistently managing MRP runs and work order integrity. Ensure efficient, timely work order scheduling and prioritization to ensure production teams can meet production targets. Empower the production control team to collaborate with production teams and other stakeholders to improve processes to ensure efficient WIP movement. Ensure adherence to all production control processes and make sure that all team members are trained and cross-trained. Report generation and status updates to internal customers. Actively participate in process improvement initiatives to ensure best practices across production control. Will be required to perform other duties as requested, directed or assigned.Requirements: Bachelor’s Degree or a combination of work experience and education preferred. Three to five years related experience in supply chain/production planning in a manufacturing environment. Three to five years of supervisory experience Ability to read, write and communicate to the degree necessary to perform the job. Able to handle situations involving sensitive issues with professionalism. Strong computer skills to include Outlook, Excel and Word. Ability to work cross functionally with many levels of an organization. Must be able to work independently, as well as under direction, must be highly energized, motivated and well organized. Prior experience with an MRP/ERP system preferred. Excellent interpersonal skills and the ability to influence others in a fast-paced work env

This position is responsible for both tactical and strategic vision and execution of supply chain activities. Advanced knowledge of sourcing, supply chain, and business acumen. Makes recommendations to support and enhance sourcing and supply chain functions.Duties/Responsibilities: Organize the purchase execution through experience with ERP/MRP Systems with PO placement and confirmation. Analyze MRP exception reports (pull, push, cancel) and reschedule previously released orders to respond to changes in the Master Production Schedule or customer demand. Verifies demand and compares standard cost/quoted job cost to the supplier pricing. Mitigates price increases, negotiates price decreases. Expedites material from suppliers to meet the master production plan. Maintain material due dates for upcoming and past due needs. Verifies receipt of items by comparing items received to items ordered and resolves shipment discrepancies from suppliers. Manage the total life cycle of inventory through maintenance of E&O. Manages optimal inventory levels and develops a plan to increase inventory turns. Assist in implementing and phasing in Engineering Change Notices. Comply with Company SOP's. Maintains strategic relationships with suppliers and execute purchasing agreements and contracts. Will be required to perform other duties as requested, directed or assigned.Requirements: Demonstrated knowledge and understanding of inventory control, purchasing and manufacturing/production planning. Proficient Experience in an MRP system Willingness to negotiate and build relationships with suppliers. Attention to detail. Ability to work well with a team / Strong Interpersonal skill. Assertive, multi-tasking, team player capable of working with minimal supervision in a fast-paced environment with changing priorities. Bachelor's Degree or a combination of work experience and education preferred. Minimum of 2 years of work experience in Purchasing and/or Material Planning Management, preferabl