The successful candidate will report to the Assembly Supervisor and will work with a team of fellow employees to ensure efficient production.Pay Scale: $17.00 - $25.00 per hour depending on experienceShift Hours: 3:30 PM - 12:00 AM, M-FThe RoleAmphenol Aerospace Operations is seeking a Cable Assembler to work out of its brand new, state-of-the-art facility in Mesa.The key responsibilities of this Cable Assembler include, but are not limited to: Read, interpret and follow blueprints and job instructions to accurately assemble product. Perform in process checks to ensure products meet internal and customer quality standards. Perform all work in accordance with quality standards and safety procedures. Maintain and clean and safe work area.The Location Mesa, AZ 25 minutes from Phoenix, AZ The PersonThe key skills and qualities of a Cable Assembler at Amphenol Aerospace Operations: Minimum 1 year of experience in wire harness/cable assembly in a manufacturing environment (strip and crimp, soldering, printing labels, ty strapping/cable lacing, connectorizing, wire harness testing, RTV, etc.) Able to read and understand job layouts, blueprints, schematics and work from written and verbal job instructions on operations Basic AS-9100 knowledge desired Required: IPC/WHMA-A-620 Modules 1-8; Preferred: J-STD-001The CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 95 years.Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions.Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all emplo

The successful candidate will report to the Assembly Supervisor and will work with a team of fellow employees to ensure efficient production.Pay Scale: $17.00 - $25.00 per hour depending on experienceShift Hours: 3:30 PM - 12:00 AMThe RoleAmphenol Aerospace Operations is seeking an Assembler to work out of its brand new, state-of-the-art facility in Mesa.The key responsibilities of this Assembler include, but are not limited to: Read, interpret and follow blueprints and job instructions to accurately assemble product. Perform in process checks to ensure products meet internal and customer quality standards. Perform all work in accordance with quality standards and safety procedures. Maintain and clean and safe work area.The Location Mesa, AZ 25 minutes from Phoenix, AZ The PersonThe key skills and qualities of an Assembler at Amphenol Aerospace Operations: Minimum 1 year of experience in Assembly in a manufacturing environment Able to read and understand job layouts, blueprints, schematics and work from written and verbal job instructions on operations Basic AS-9100 knowledge desiredThe CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 95 years.Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions.Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement.We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a cult

The successful candidate will report to the Machining Supervisor and perform machining duties with the manufacturing environment.Pay Scale: $19.00 - $30.00 per hour depending on experienceShift Hours: 3:15 PM - 11:45 PMThe RoleAmphenol Aerospace Operations is seeking a CNC Machinist to work out of its brand new, state-of-the-art facility in Mesa. The key responsibilities of this CNC Machinist include, but are not limited to: Is knowledgeable in CNC machining and secondary equipment Assists Production Supervisors with all aspects of KPI requirements (Safety, Quality, Delivery, Inventory and Cost) Active participant and advocate of Lean & 5S culture company wide Follows "in-process" quality inspections and works with team members to ensure total quality Aids in feedback to planning & engineering to optimize productivity Provides translation service for team members when required Ensure usage of correct gaging, hand measuring tools & metrology equipment to deliver the highest possible quality components for our customers Support preventative maintenance of equipment and report machine issues to production supervisorThe Location Mesa, AZ 25 minutes from Phoenix, AZ The PersonThe key skills and qualities of a CNC Machinist at Amphenol Aerospace Operations: Minimum 2 years of lathe production experience on CNC & related production equipment Read and understand job layouts, blueprints, schematics and work from written and verbal job instructions on operations Strict time management with self and other employees to support a productive work environment. This includes providing hourly production stats to shift supervisor & implementing quick corrective actions to help team members reach their goals Excellent attendance Ability to communicate with and collaborate with team members Intermediate computer skills Ability to work on a busy manufacturing floorThe CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aer

The successful candidate will report to the Machining Supervisor and perform machining duties with the manufacturing environment.Pay Scale: $19.00 - $30.00 per hour depending on experienceShift Hours: 10:30 PM - 7:00 AMThe RoleAmphenol Aerospace Operations is seeking a CNC Machinist 3rd Shift to work out of its brand new, state-of-the-art facility in Mesa. The key responsibilities of this CNC Machinist include, but are not limited to: Is knowledgeable in CNC machining and secondary equipment Assists Production Supervisors with all aspects of KPI requirements (Safety, Quality, Delivery, Inventory and Cost) Active participant and advocate of Lean & 5S culture company wide Follows "in-process" quality inspections and works with team members to ensure total quality Aids in feedback to planning & engineering to optimize productivity Provides translation service for team members when required Ensure usage of correct gaging, hand measuring tools & metrology equipment to deliver the highest possible quality components for our customers Support preventative maintenance of equipment and report machine issues to production supervisorThe Location Mesa, AZ 25 minutes from Phoenix, AZ The PersonThe key skills and qualities of a CNC Machinist at Amphenol Aerospace Operations: Minimum 2 years of lathe production experience on CNC & related production equipment Read and understand job layouts, blueprints, schematics and work from written and verbal job instructions on operations Strict time management with self and other employees to support a productive work environment. This includes providing hourly production stats to shift supervisor & implementing quick corrective actions to help team members reach their goals Excellent attendance Ability to communicate with and collaborate with team members Intermediate computer skills Ability to work on a busy manufacturing floorThe CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Am

The Role -Amphenol Aerospace is seeking aFilter Design Engineerto work out of its state-of-the-art facility in Mesa, AZ.The key responsibilities of theFilter Design Engineerinclude, but are not limited to: Responsible for the design of electrical filter connectors Provides design guidance for the development of mechanical interconnect components, and specification of electrical devices used in EMI filter and Transient Voltage Suppression devices Prepares designs, drawings, and specifications Prepares engineering analysis to baseline designs Disassembly of completed assemblies for troubleshooting electrical faults Interfaces with other departments for the manufacturing and testing of samples (production electrical testing, electrical/mechanical troubleshooting) L-C filter networks Transient suppression devices Coordinates the manufacturing of customer prototypes Works with the test lab to use and understand testing for insertion loss, capacitance, isolation resistance, and inductance Performs the functions required to process estimate requests and marketing product requests Reviews customer documents for compliance with AAO documents and if necessary, prepares new designs to conform to these documents Willingness to travel Keeps supervision informed of status of all activities on a periodic basis Works closely with the BDM and Product Managers of various business unitsLocation - Mesa, AZ 25 minutes for Phoenix, AZThe Person -The key skills and qualities of aFilter Design Engineerat Amphenol Aerospace: Ability to maintain dedicated focus on intricate details of engineering designs Willingness to contribute extra effort in support of critical business opportunities Experience with PTC Creo, Windchill, P-Spice, or similar simulation software is preferred but not required Bachelor's degree in Electrical or Mechanical Engineering or a related field Understanding of electrical capacitor and inductor component design Familiarity with soldering processes and solder joi

Manufacturing Associate will report directly to the Logistics Supervisor and will work with a team of fellow employees and assembly staff to ensure efficient production of electrical components.Shift Hours: 7:00 AM - 3:30 PMThe RoleAmphenol Aerospace Operations is seeking aManufacturing Associateto work out of its brand new, state-of-the-art facility in Mesa.The key responsibilities of thisManufacturing Associateinclude, but are not limited to: Reviews work in progress multiple times per day and moves to the next station when ready. Pulls short work orders from floor and relocates to materiel review rack. Reviews short work order rack against incoming shortage report, fills work orders and re deploys to the floor. Retrieves materials for production and packaging areas and communicates shortages through the proper channels. Assists with picking work orders for production floor. Assess KANBAN levels and reports restock through proper channels. Participates in the lean and 5S culture in the production area.Location Mesa, AZ 25 minutes from Phoenix, AZThe PersonThe key skills and qualities of aManufacturing Associateat Amphenol Aerospace Operations: Able to work from written/verbal instruction Strict time management with self and other employees to support a productive work environment Able to communicate with and collaborate with team members Able to work on a busy manufacturing floor Able to multitask efficiently with simple procedures Be familiar with layouts/blueprints/schematics Familiarity with manufacturing environment preferred Possesses mechanical aptitude Must be able to stand for long periods of time Must be able to lift up to 100 lbs with assistance from another team memberThe CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 95 years.Focusing

The successful candidate will report to the Machining Supervisor and perform tumbling, heat treat, and saw cut duties within the secondary operations environment.Pay Scale: $17.00 - $19.00 per hour depending on experienceShift Hours: 7:00 AM - 3:30 PMThe RoleAmphenol Aerospace Operations is seeking aManufacturing Associate to work out of its brand new, state-of-the-art facility in Mesa.The key responsibilities of thisManufacturing Associate include, but are not limited to: Deburrs and cleans machined components Performs heat treating for machined components Perform saw cut operations including lifting raw bar stock and removing burs Follows "in-process" quality inspections and works with team members to ensure total quality Actively participates and advocates for Lean and 5S culture Supports preventative maintenance of equipment and reports machine issues to production supervisorLocation Mesa, AZ 25 minutes from Phoenix, AZThe PersonThe key skills and qualities of aManufacturing Associate at Amphenol Aerospace Operations: Able to work from written/verbal instruction Strict time management with self and other employees to support a productive work environment Able to communicate with and collaborate with team members Able to work on a busy manufacturing floor Able to multitask efficiently with simple procedures Be familiar with layouts/blueprints/schematics Familiarity with manufacturing environment preferred Possesses mechanical aptitude Must be able to stand for long periods of time Must be able to lift up to 100 lbs with assistance from another team memberThe CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 95 years.Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to in

The successful candidate will report to the quality supervisor and will support calibration activities and maintain records of various tools, instruments and gauges used for product acceptance or verification/validation.Pay Scale: $20.00 - $26.00 per hour, depending on experienceShift Hours: 7:00 AM - 3:30 PMThe Role - Amphenol Aerospace Operations is seeking a Metrology Inspector to work out of its state-of-the-art facility in Mesa, AZ.  The key responsibilities of this Metrology Inspector include, but are not limited to: GD&T Intermediate Level Have a strong working knowledge of measurement techniques and proper use of measurement equipment Operate and program equipment such as Mitutoyo Quick Vision and Keyence IM/LM series. QVBasic experience is a plus. Program and maintain Keyence programs. Summarize quality control data on the computer and report results. Document nonconforming product, accept resulting rework. Perform Calibration and Capability studies for new machines. Assist Production personnel with measurement issues and drawing interpretation.  Assist with operator training as needed. Performs First Article Inspection and completes related documentation following Amphenol Quality Procedures and AS9102. Proficient with Microsoft Office. Support calibration activities and maintain records of various tools, instruments and gauges used for product acceptance or verification/validation.The Location Mesa, AZ 25 minutes from Phoenix, AZ The Person  Minimum of 3 years' experience in equal or related field. Able to read and work from written job instructions on operations with minimal guidance. Able to frequently pivot from working in a team environment to working independently depending on the day and work assignments. Proficient computer skills. Vision acuity 20/25 (with or without corrective lenses), must pass the annual eye exam.The CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Op

The successful candidate will provide leadership and technical expertise to identify, resolve, and eliminate quality issues and problems. Primary focus will be to work with assigned manufacturing departments on quality related issues.Shift Hours: 7:00 AM - 3:30 PMThe Role Amphenol Aerospace Operations is seeking a Quality Engineer to work out of its brand new, state-of-the-art facility in Mesa, AZ.The key responsibilities of this Quality Engineer include, but are not limited to: Coordinate and maintain internal audits schedules in accordance with ISO9001/AS9100 Quality Management System and standards and Amphenol polices. Assess Amphenol business processes, systems, and products through the internal audit program to assure compliance to customer requirements, Amphenol procedures, and policies and ISO9001/AS9100 standards. Measure and monitor management system data and reports to management on quality system compliance status and improvement initiatives. Initiate change request of management system procedures, policies, and internal audit checklist and leads implementation efforts. Initiate and verify the effectiveness of formal Corrective Actions and drive improvement of the QMS. Communicate with government customers on management system data/status and provides management system insight through internal and 3rd party audit observations. Investigate and disposition Customer Returns involving product from your area of responsibility. Work extensively with Amphenol's computer system, both the AS400 main frame and the local PC network.  Utilize Microsoft Excel, PowerPoint, Word, and Data3 software. Occasionally travel to customers to resolve, or explain prevention of, cited quality issues.Location Mesa, AZ 25 minutes from Phoenix, AZ  The Person The key skills and qualities of a Quality Engineer at Amphenol Aerospace Operations: Engineering degree or equivalent education/experience Some applicable experience in an industrial/manufacturing environment Knowledge of sta

The Role -Amphenol Aerospace Operations is seeking aQuality Control Supervisorto work out of its state-of-the-art facility inMesa, AZ.The successful candidate will supervise the employees and workload for ou Final, Receiving and Gage Lab Inspection. Provide customer support. Report throughput and improve over-all departmental procedures in support of Inspection and critical customers.The key responsibilities of theQuality Control Supervisorinclude, but are not limited to: Conduct Quality audits when appropriate and when assigned. Lead process documentation and improvements in relation to inspection and Quality. Maintain employee time keeping and vacation schedule and schedule overtime as required by workload. Assigns work to hourly inspectors. Provide guidance to inspectors on the interpretation of drawings and routines. Work with Quality Engineering team regarding updates and new inspection routine releases to meet customer requirements. Validate inspector rejections. Learn all aspects of inspection work. Supervisor should understand how test equipment works and what drives the inspection requirements. Ensure Inspected product and paperwork is complete and accurate. Ensure delegated source at Amphenol is available per customer contracts, support and schedule training and certifications. Oversees inspector training and annual Quality training as required by the Quality Management System. Coordinates action items with quality engineers and process engineers, manufacturing, and all other required resources to satisfy customer needs. Utilizes problem solving techniques and tools to assure full and final resolution of issue. Lead and develop a team of inspectors; handle employee issues as they arise.The key skills and qualities of aQuality Control Supervisorat Amphenol Aerospace Operations: Knowledge of AS9100 Business Management System IPC/WHMA-A-620, J-STD-001, AS9102 (FAI) standards, and auditor experience Knowledge of blueprint reading and GD&T Working knowledg

TheSr. Design Engineeris responsible for the design, development, evaluation, & documentation of sophisticated parts, products, &/or systems.The Role -Amphenol Aerospace Operations is seeking aSr. DesignEngineerto work out its state-of-the-art facility in Mesa, AZ; following an initial training/orientation period, a hybrid work option may be available.The key responsibilities of theSr. Design Engineerinclude, but are not limited to: Develop new products to satisfy a market need or solve a user problem Develop evaluations/test programs to verify new designs or modifications to current designs Prepare and manage planned programs, with or without subordinate responsibility Provide engineering support activities including preparation and administration of engineering changes and variation memos, processing of S-sheets and estimate requests, coordination of experimental contracts, and support of qualification programs Provide engineering support to manufacturing teams relating to production problems and engineering design Coordinate component manufacture, assembly, and sample preparation for Qualification and Development programs Interface directly with customers and suppliers, when required Keep supervision informed of the status of all activities on a periodic basis Prepares drawing packages for new and sustained designsLocation - Mesa, AZ 25 minutes for Phoenix, AZ Hybrid work option Following initial training/orientation periodThe Person -The key skills and qualities of aSr. Design Engineerat Amphenol Aerospace Operations: Required: Bachelor's degree in related engineering discipline or equivalent education and experience Experience with computer-aided design (Creo or equivalent) Proficient in the use and interpretation of geometric dimensioning and tolerancing Mechanical design and analysis, drafting and interpretation of engineering drawings, reading, and writing of technical documents Technical oversight and project management of product develo

Candidate will report to the Machining Supervisor and perform machining duties with the manufacturing environment.Pay Scale: $19.00 - $30.00 per hour depending on experienceShift Hours: 3:15 PM - 11:45 PMThe RoleAmphenol Aerospace Operations is seeking a Swiss CNC Machinist 2nd Shift to work out of its brand new, state-of-the-art facility in Mesa. The key responsibilities of this Swiss CNC Machinist 2nd Shift include, but are not limited to: Is knowledgeable in Screw / Swiss / Sliding headstock CNC machining and secondary equipment Assists Production Supervisors with all aspects of KPI requirements. (Safety, Quality, Delivery, Inventory and Cost) Active participant and advocate of Lean and 5S culture company wide Follows "in-process" quality inspections and works with team members to ensure total quality Aids in feedback to planning and engineering to optimize productivity Provides translation service for team members when required Ensure usage of correct gaging, hand measuring tools & metrology equipment to deliver the highest possible quality components for our customers Read and understand job layouts, blueprints, schematics and work from written and verbal job instructions on operationsThe Location Mesa, AZ 25 minutes from Phoenix, AZ The PersonThe key skills and qualities of a Swiss CNC Machinist 2nd Shift at Amphenol Aerospace Operations: Minimum 2 years of lathe production experience on CNC and related production equipment Cam style Escomatic, Tornos – Bechler experience is a plus as well as multispindle machining Familiar with batch heat treating, and annealing special alloys as well as Nadcap Certification is preferred Strict time management with self and other employees to support a productive work environment. This includes providing hourly production stats to shift supervisor and implementing quick corrective actions to help team members reach their goalsThe CompanyWith manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pas